Error correction is not magic performed by the software. There's no reason the software can't run on other brand drives other than to annoy the user. Since there are only 8760 hours in a year isn't that 171 years? I still trust SCSI, median average failure time 1.5 million hours! What's your longevity record for consumer grade IDE and SATA drives. There were three or four newish drives with the "click of death", the heads refusing to park properly.įortunately there was a 750GB with less than 1000 hours, two 250GB drives with no faults, one Seagate 250GB with one error that I corrected, a working 160GB laptop SATA drive, and surprisingly a couple of those skinny Maxtor IDEs which had big hours but no faults. There were several newish drives with I guess bad logic boards as the drive was not detected at all. Some of the drives with unfixable media faults had hours as low as 1800. Most of the drives had POH hours between 500. Since WD and Samsung only evaluate defects, which Seatools does already, why bother?Īt any rate the POH (powered on hours) was very interesting to me. It evaluates any manufacturers drives, and allows error correction on Seagate (and Maxtors made by Seagate) drives. The best tool by far was Seagate's Seatools for DOS. I downloaded all the Drive Tools I could find from Seagate, Western Digital, Samsung, Hitachi and Maxtor. I recently bought a box of 20 plus hard drives, a mixture of IDE and SATA.
0 Comments
Leave a Reply. |